 |
Nozzle
Nr.1
Fixed/Rear
Blowing |
 |
Nozzle
Nr.2
Rotating/Rear
Blowing |
|
Rectangular, Oval, or Round ductwork
|
Round ductwork up to 28” in diameter
Propelled by an internal turbine that is driven by the air
flow
|
 |
Nozzle
Nr.3
Fixed/Forward
Blowing |
 |
Nozzle
Nr.4
Fixed/Rear
Blowing |
|
Rectangular and round ductwork
Used to “PUSH” the debris forward from
branches and verticals into the main duct trunk
|
Lightweight Nozzle for:
Fiberglass duct
Fiberglass-lined duct
|
 |
Nozzle
Nr.5
Fixed/Rear
Blowing |
 |
Nozzle
Nr.6
Fixed/Forward
Blowing |
|
Residential rectangular and round duct work.
Can also be used for various commercial applications
|
Residential rectangular and round duct work.
Pushes debris forward from registers into the main duct trunk
|
 |
Nozzle
Nr.7
Brush
Nozzle Fixed/Rear Blowing |
 |
Nozzle
Nr.8
Super
Small/rear blowing |
Designed for removing rust and thick layers of hard
contaminants.
(Different types and sizes of
brushes are available) |
Used for central vacuum systems, airplanes, submarines and any
place where the ducts/pipes are very small.
|
